• Sara4035

Laura9093

Offtopic. Where can I find something like this for a single outing, as shown in the photo? It's an interesting item...

Tanner

in private messages.

David7773

Here is what I want to buy:

Tanya

Your protégé from Dnipro received a Resan aquarium as a bonus from me on Saturday. Call him back - maybe he will trade it for something.

Mariah

It's not getting any easier. I got these "forks." It turns out that there is an input cone at the beginning, but as for how to attach it, the parts are either missing or nonexistent at all... In this thread already - how did anyone attach such a wonder?

Chad4168

In my resin, such a wonder is attached to the tube sticking out of the partition; this cone simply fits onto it, with no fasteners needed, any appropriately sized tube will do. In my thread, post No. 1 has horns, and No. 22 has no horns.

April3499

Does it fit into the PVC pipe? If it fits, then use Teflon tape or aquarium glue.

James4342

It will fit the tube, but the question is a bit different. I need to make it removable. That is, I will drill a hole in the plastic partition, and today I will go look for some kind of plastic fitting, like an elbow, to which this deflector will be attached. I would prefer not to glue it - I will try to find something with threads, like a nut and bolt, to secure it from both sides.

Alyssa1438

I bought a gardening attachment today. Here's how it looks, both separately and assembled. But one thing bothers me - I need to drill a 35mm hole in the partition!!!! That's quite a lot.... Does anyone know of any tools from washing machines or something else??? Where else can I look?

Ronald5720

You can try to attach the nozzle to the partition using a smaller diameter of the clamping nut. I don't know the thickness of the partition, but the length of the thread of the smaller diameter is greater compared to the second clamping nut. Roughly, the thread there is 1 inch (25.4 cm). Still, the hole will be smaller compared to 1 3/8 inches (34.9 cm).

Larry9400

I have already twisted it before - then the first (thick) part will stick out significantly - 3.5 cm. The partition wall will be approximately 1.5-2 mm.

Leslie

See here for the full assortment; you are missing an adapter similar to the Loc-Line ___ Ball Socket x MPT Connector. Loc_Line_Plumbing comes in sizes of 1/2 and 3/4 inches, and the output should be "3/4 (or 1/2, depending on what you purchased) with external threads," to which we attach the above-mentioned adapter, and it’s better to add an American coupling for convenience.

Daniel

Can you buy it there?

Paul

Marindepo only ships to U.S. addresses (it seems they also ship to Canada), you will need the services of a middleman or help from friends living in the shipping area who can forward the items to you.