-
Andrew9581
Robert
What is the density? Can I have a photo of the aquarium? What water do you use for water changes? What chemicals do you use? Check it for foreign objects. I recommend checking the integrity of the cords.
Luis3725
Well, ammonia and ammonium salts are quite toxic substances, which is why they die; they need to be brought down to 0 first. There can be different solutions to this.
Devon107
The density according to the salinity meter is always in the green zone, fluctuating slightly. There are no wires in the water... only the heater, which is intact and not leaking. The water is osmosis, salt TETRA MARIN. There are no chemicals at all. There is a problem with the photo, no camera.
Karen81
What does it mean that the salinity meter is floating in the Green Zone? I know a few people who had it floating like that; we are talking about a float type, as I understand, and the salinity was elevated. The reason is banal: there was a crack, and it was taking in water. Check if it’s fogged up inside, or better yet, test the water with a different device or with acquaintances. Good luck to you. I didn’t see anything suspicious in the parameters regarding Ksyusha’s death; on the contrary, she was a fan of nitrates, always looking to fill her belly.
Noah1632
Check the water for copper.
Jason9385
The nitrate is already 0. I'll copy the ammonia from here then:
Matthew
If the livestock dies within a day or two, it could be either chemical poisoning or copper. I would do a 100% water change. Using a mosquito repellent or aquarium paint works wonders.
There is another point: if ammonia levels remain high for too long, eventually the snails will die as well.
Ammonia could have risen due to the current situation.
I wouldn't do tests; in this case, they are irrelevant (except for the copper test).
Due to low density (salinity), softness may dissolve, but snails can live for a long time at low density. Corals like Xenia can withstand very high density.
In my humble opinion.
Stacy6866
Can you provide more details about the raptor? Should it not be placed near the aquarium or not turned on at all, or what?
David3217
I've heard about the raptor from three different aquarists now. They turned it on in the room with the aquarium and had problems. Also, cockroach and fly sprays can cause significant issues with marine aquariums. I can't say more precisely - we need to study the composition of the raptor itself.
Jenny
Can anyone tell me if they use this type of thermometer? Does anyone have symptoms like mine? Its tip looks "coppery." I've already removed it from the aquarium, I'm currently doing water changes and added carbon. For now, I'm blaming it.
Joseph1346
Somewhere it was written that it cannot be put in a marine aquarium. But I think it's unlikely, and the reason is not in it. Off-topic: Once, a 10 cm copper wire fell into my 250-liter aquarium, and I found it after a couple of months. I didn't notice any changes in the aquarium or any deterioration in the well-being of the fish.
Michelle
Max, do you mean liquid or plate?
Javier5186
The temperature sensor can be insulated with heat shrink tubing.
Thomas
I know for sure about the liquid (according to aquarists). I wouldn't risk it with the plates either.
Daniel4967
Thank you all very much! The reason has been found. It was indeed the electronic thermometer. After removing it and replacing the water, Rodaktis started to open up and has already fluffed up after 4 days.
Jacob7201
I use liquid RAID. A couple of times I even forgot to close the aquarium. It was fine.