• 3D printing is needed.

  • Hunter1471

A question for you... I need to print a couple of these devices (grating). The mounting dimensions will be slightly different. Does anyone have that capability? For money, of course.

Nicole263

Good, if there is a file with the model, anyone can print it. I have printed peristaltic pumps. I think there are about a dozen such places in Kyiv.

Jessica

Thank you for your response! Will the tables from the link on the riffcentral not be enough?

Nicole7122

You need an STL file. For example, here are the conditions: As stated in your article, you need to install the free program OpenSCAD, copy the model text from the article into it, then export it to STL and send it by email for printing. There are also many online catalogs from which you can download the file and send it for printing. Here is what I used: There are quite a few different modeling programs. And the biggest problem is learning how to work with them.

Stuart

Twitch

Brandi

An important aspect of this technology is the shrinkage of plastic! Usually, a part with precise dimensions is not achieved on the first try! (Shrinkage, in turn, depends on the type of plastic, manufacturers, and in some cases even the color of the plastic.) I am currently in the process of printing some parts for my future aquarium! You can use free 3D CAD software to create your own 3D model!

Joseph2576

Guys, thanks for the tips!!! I got a job for the weekend. I will be studying 3D modeling.