-
Lauren
Karen
If this is the Atman AF 2300A, then you can install it confidently. This one works fine.
Heather
Atman AF 2300A can be installed for up to 1000 liters. Pump 2500.
Nicholas5194
Thank you very much for the positive response; the previous ones were negative.
Best regards.
Rachel9060
Atman AF 2300A buzzes like an airplane, at least for me.
Crystal
How is Atman's performance, how does it produce foam? I'm curious, maybe there's somewhere to see it?
James3382
Atman AF 2300A, the one I have, pushes foam, it's big, barely fit in the sump, I'll send photos in a few days.
Brooke3987
Here is a photo of this pen. Sorry, the photo has been removed for technical reasons.
Reginald5073
I deleted the photo from there. I'll post it soon...
Debbie3587
Who has the same skimmer? Why does it hum like a steam locomotive? I threw away the original pump... I replaced it with a 3000 l/h pump and didn't mount it on the skimmer base but secured it further away, laying it on foam - now it hums much quieter... But, damn, air is being sucked in so that on the other end of the tube you can hear it wheezing!!! How can I get rid of this???
Brandi
In AquaMedik there is this thing -
just a bottle with two fittings, called a silencer. Such smart Germans.
Dennis
Oh! The same thing. To avoid noise, you need to get a Tunze for $300 - silence, bliss...
Kimberly
By the way, how is the aquamedic working quietly? How does it push the foam?
Patrick4439
Aquasalon - we are looking forward to the photos of the sea jar.
Michelle5859
to prevent the air intake pipe from wheezing, I put on a stone diffuser...
Andrew4194
What are his dimensions? I'm currently in the process of choosing a foam pad.
Debra8438
up 45, width 25, and length 35. And here you can take a look at the photo on the SAMP page.
Troy8808
The samph turned out great - big, spacious, and the foam separator fits in. The only thing is, it would be better if the glass separating the variable level chamber from the constant level chamber(s) were slightly tilted - the water won't splash as much. So, how's the foam production? Does it accumulate a lot during the day? I'm not having much luck. There's plenty of foam, but it doesn't really want to overflow into the collector. The water level is at (or just below) the removable collector section. How about you?
Emily3506
And here is my sample and the highlight of the program - a mechanical auto-refill! Without any pumps or sensors (made in 10 minutes from a piece of bent pipe)!!!
Guy
I don't quite understand how your auto-refill works... I also plan to install an auto-refill system. I have an acquaintance who is an electrician - a pro with circuits. I want to get him to make a water sensor for me - that is, when the terminals are in the water, the refill pump doesn't work, only when the water level drops does the pump turn on... anyone willing can solder it together. I heard that the auto-refill system costs around 150 USD. But again, there's the problem - for the terminals that will be placed in the water, what kind of metal should be used??? He could also make it based on a laser... but he said there’s more hassle with the setup...
Luis3725
I understand you. The meaning is clear - everything genius is simple. If I can't manage with the sensor, I might make a similar one.
Loretta5483
I made something based on this photo - it really muffles!!! I will share it soon...
Rachel
What is the water level in the department with the pensioner?
Sydney
I have 15 cm.
Joseph
I have 24 cm.
Alexandra
The contacts from the vacuum cleaner brushes (carbon) won't work; I used to turn on the call like that when water was being poured from the tap with a hose (so it wouldn't splash). If that doesn't work in the sea, then it's off to the trauma doctor for titanium nails and screws, which are definitely used in the sea.
John3335
It's interesting what we make from titanium in everyday life. What are medical tweezers made of?
James8887
Antique ones are made of chrome-plated brass. Modern ones are made of chrome-plated precision tool steel. Titanium is rarely used in everyday life. It is very expensive and is used in special operating conditions (mainly in the military industry). In medicine, it is used as endoprostheses and implants.
Anthony4281
Yes, half of the homemade rods on the Bukhara are made of titanium, they can even make a half axle for a truck if you order it. For example, in my Volvo, the entire driveshaft is made of titanium. And at the Lohodrom in Perovo, the titanium wrenches are very convenient and lightweight; I have two that have been working for about ten years. And the most "expensive" wrench is a meter long, a whole 30! How expensive!
Chelsea
Where can I find a 2mm diameter shaft for a pump, 10-14 cm long - made of titanium? Or, at the very least, ceramic?
Alejandro
Well, that's for you. He has plenty of this titanium. And almost for free.
Sheila1322
By the way, here's the Tunze DOC skimmer, how it works for my friend:
It pulled this out in a day!!
I'm in shock.
Michelle
At the atman glass, it's not just a glass for collecting foam, but a HUGE GLASS!!! I haven't drained the crap from it for three days now... In the evening, I'll drain it and measure how many liters it holds.
Randy
Bukhara, Perova, well said, it's a scam. Yes, maybe someone stole something and will sell it cheaply, but there's no guarantee that titanium is titanium. One of my former bosses used to say, "who will be responsible for this?" That's what I remembered. Or maybe it's easier to find out how much a couple of small screws cost in "medtech" to fix broken bones; after all, the "market" is there and everything is for sale.
Jill9137
And in a day, or let's say in three days, how much foam does the beer tap produce? The volume of the glass is not yet an indicator of the good performance of the beer tap.
Barbara
He has already contacted me, and we communicate every day for about eight years now. By the way, Tulip also brought me to the forum.