• Is it possible to modify the VorTech MP10 controller?

  • David2398

Actually, there are no questions about the product itself - it's an excellent device. The question is about the controller - has anyone tried to explore its "brains" and is it possible to add some control block to link several modes in a 24-hour cycle? That is, it works for 10 hours at night, then the RiffCross turns on for 1 hour, then Long Wave for 3 hours, then Short Wave for 3 hours, and the same in reverse order.

David2398

Such questions are probably only for the manufacturer; I wouldn't dare to solder or reprogram anything in such equipment. However, the idea of different modes would be a good one.

Wendy

I don't think there's anything super genius in the controller. Take it apart, take some photos, and send them to the same person - maybe they'll add something.

Joyce

Nothing genius, just a soldered processor; I highly doubt this can be done without special equipment. It's not like cutting a pipe or soldering a capacitor.

Caitlin3279

They just replied - Offtopic Yaroslave, At this time, our pumps are unable to run multiple modes, unless they are changed manually. If you are looking for this type of functionality, you might be interested in looking into an aftermarket controller that can perform these functions with our product line. If you have any more questions, please let me know. I thought so, that's why I immediately turned to the "craftsmen."

Mike

Can I know who this Kulin is?

Karen1649

Max, well, our forum members. Whoever responds is a Kuli-bin.

Nicholas2252

Even if you manage to "rip" the firmware from the processor, the most you will get is assembly code full of errors. It's easier to write the program yourself than to try to figure out something like that.