• penny on injectors

  • Erica752

I made a little filter in my spare time. Although I had been planning this project for about two years (it's been two years since I bought the pipe, injectors, etc.). Well, it works fine. I haven't measured how much air it takes, but it seems like a lot. For now, it's in a system with a volume of about 1300 liters and not a large amount of fish, and it doesn't seem to produce much waste; I thought it would be more. The height is 1.30 m. The base size is 35*45 cm. The pipe diameter is 250 mm. I am very grateful to Vitalik from Dnipro, who made the cones, the bayonet connection for the cup, and the nuts for the connection couplings (I've never encountered such a simple and well-thought-out solution). After a week of observation, it seems that this volume of the aquarium is a bit small for this device.

Daniel

Is it pushed on some AM? It's hard to see.

Eric

pump like this SunSun 17000 l/h

Jennifer

Where did you get the pump?

Brandi

Glory to the young man! In other words, he who knows how to make the "sump" of a marine aquarium with his own hands deserves respect.

Aaron

Why are you so huge?

Melissa3200

Beckett 1408 Foam Head injector?

Timothy

I bought the pump a long time ago, and it seems like "Arovana" has them now. Why is it so huge? This one was taken as a basis. Question for the specialists: as you can see, the level in the foam chamber is regulated by the valve at the outlet, but you can't maintain a constant level with just one valve. That's why it keeps "fluctuating" for me. What do you suggest? Added after 8 minutes Video: