• New product Penik 400-800l.

  • Rodney3101

I tested it, it produces a thick, fine foam, very quiet, very compact 170X275X585mm, pipe diameter 150mm, lower platform is flat, the impeller is a needle wheel like in Deltec. I am very satisfied with the foam maker.

David3217

Is this from the new shipments? I'm curious, how much does this pen cost?

Sandra7004

Yes, this is new.

Karen

The pump is weak, it can pull air up to 100 liters; with such a size of the foam generator, the pump needs to be modified.

Brian7092

The main and undeniable advantage of the new Chinese skimmers is the price. However, the pump definitely needs to be changed (I shudder at the memory of my pump in the Reef Octopus calcium reactor). If the pump is replaced, it will be a decent, inexpensive skimmer for 250-400 liters.

Jerry

In the first photo with the foam gun, there is an octopus pump, and in the second one, the atman is already presented.

Keith7534

The pump works reliably well and does not need to be replaced. It draws in enough air for the volume of the foam maker. In the first photo, the pump is Aquabi (Deltec), the price is listed for Atman, but it can also be equipped with Aquabi.

Destiny

The Aquabee 2000 pump, as claimed by the manufacturer, draws 450 liters of air per hour, while the Atman PH 2500 draws 60-80 liters of air per hour.

Jeffrey496

Stas, you are contradicting yourself. If the pump needs to be replaced, it is unlikely to be inexpensive. And with an intake of 100 liters/hour of air, it should be replaced without hesitation.

Susan

How many??????????????????????????????????????????? ???????????????????? flights, if you could be more specific?

Amy1672

specially for you and in this case, there is more foam than the pump provides, it won't fit, and the pump doesn't need to be heated!!! I think we won't return to this issue.

Joshua9847

Are you trying to say that the working water level of this skimmer is around the red line???? Judging by the video, that's far from the case......to put it mildly.

Amber1273

I have a homemade skimmer with parameters similar to your Bubble Magus BM, equipped with a modified Atman PH 2500 pump, which has much higher performance, almost like the Aquabee 2000 pump. This skimmer will work well if paired with a Deltec, but with the Atman, it's completely useless.

Bridget

Does anyone want to say that they held an Atman with a factory-made Deltek needle in their hands? And knows how it works?

Jeanne

Very satisfied with the work of the pen.

Hunter1471

didn't hold, but let this DeltaTech impeller be made of platinum, "it won't jump higher than its head." If you want specifics, give me numbers, because the words "enough for the volume of the foam" don't cut it today.

John3142

Here is more information, photos, and numbers.

Scott9892

In this case, and provided that they are equipped with German pumps (specifically the ones shown on the official website), these are quite good products. I have seen them in person, and they definitely justify their price.

Joshua

I have complaints mainly about the Chinese pump, as I have been struggling with them for a long time. If you put an Aquabee on the pipe, the skimmer will work well for a 100-200 liter aquarium with a limited number of fish.

Julia

If you set up an aquarium with Deltec needles and the corresponding injector, it will be practically a Deltec APF 600. And when it comes to 100-200 liters, we can confidently talk about 300-700 liters; I won't even discuss the Chinese foam pumps. As for the culture of communication, it seems that the moderators have finally taken these topics under control.

Meghan

The link, by the way, works.

Christopher1252

This pen also works!

Nicholas

There is a lot of interesting information about this pen here.

Mike

Dear gentlemen! I am closing the topic! If you don't understand, please read the rules!

Larry9400

I opened the topic, but... if there is one more similar outburst, I will close it once and for all.