The problem of component integration.

Susan1358

Hello to all sailors! During the installation of equipment in the SAMP, I encountered the following difficulties: 1. ASKOL 80 W submersible return pump. Output fitting 1". How to connect it to PVC pipe? Can I use a transparent PVC hose (like a drip line, 3mm wall thickness, non-reinforced)? 2. Aquamedic36 W UV. Inlet and outlet are also1". It will be installed in parallel with the return, with the ability to adjust the water flow. The same problem with the hoses. 3. What clamps can be used when working with flexible hoses? 4. To reduce noise and vibration, what do you recommend placing

Brooke

1) Construction ties for wires last 2-3 years and then break. 2) Aluminum wire. 3) Acrylic glass with silicone blobs or suction cups... That's all, it seems.

Brenda

Thank you for the link! I bought everything I needed at EPICENTER except for the connectors for the hoses - they don't have them! It seems I'll have to make them myself.

Kevin3579

In some places, I didn't turn the Christmas trees. I glued a piece of pipe. I heated it with a hairdryer. I shaped it into a bulb (how to explain) - by pressing it against the concrete floor on the balcony, I formed a rim so that the hose wouldn't slip off. Then I stretched the hose (it can also be warmed up a bit, but it's better in boiling water). If the area is under pressure and not submerged in saltwater, I use metal automotive clamps from NORMA.